Dansk Designcenter, Copenhagen, Denmark.

Ash Select, PH5. Architect: Henning Larsens Tegnestue, Copenhagen.

Wall installation   Gustafs Panel System® is fitted on to walls by means of Capax mounting profiles. Each panel is locked on all four sides by means of Capax profiles. The profiles are fitted on to a screwable base that is firmly anchored in the underlying construction.   In order to achieve a fully satisfactory result it is important for the underlay to be well balanced vertically and horizontally. If the panel wall is perforated or slotted and is to serve as a sound absorber, the under-construction is extended so that a space is created for mineral wool insulation and air gaps. The mineral wool shall always be placed tight behind the panel.   Wall construction   Gustafs Panel System® can be fitted on most types of underlay. Before the fitting commences the fitter must ensure himself that the construction behind is well anchored and dimensioned in order to bear the weight of the panel wall. This applies in particular to high walls and large areas.

1 Battens and     insulation 2 Capax profile 3 Gustafs panel

1 Battens and    air space 2 Battens and     insulation 3 Capax profile 4 Gustafs panel

1 Metal batten 2 12 mm Plywood     or OSB-board 3 12 mm Gypsum    board 4 Capax profile 5 Gustafs panel

1 Metal batten 2 2x12 mm     Gypsum board 3 12 mm Plywood      strips 4 Capax profile 5 Gustafs panel

Download wall construction as a CAD-drawing »

Edge profiles         Closed joint       Open joint with lacquered edge for profile       Open joint with lacquered edge for profile and strap       Open joint for demountable panel       Straight, visible edge, lacquered       Cut panel, no visible edge    Lacquered edge  Solid edging